> ## Documentation Index
> Fetch the complete documentation index at: https://docs.famulor.io/llms.txt
> Use this file to discover all available pages before exploring further.

# Amazon Chime SDK Voice Connector

> Connect AWS phone numbers to Famulor with an encrypted SIP trunk.

Use a Voice Connector in the Amazon Chime SDK console to route an AWS phone number to a Famulor assistant and place calls through AWS. You need an AWS phone number assignable to the Voice Connector and permission to edit both.

## Send incoming calls to Famulor

1. In Famulor, open **Settings → Phone numbers → Add a number → Add SIP integration**. Choose a **SIP region** and copy the hostname from the SIP URI.
2. In the Amazon Chime SDK console, open **Voice connectors** and create or select a Voice Connector in the region you will use. Enable **Encryption** for TLS and SRTP.
3. Under **Origination**, enable the route and add the Famulor hostname as **Host**, port `5061`, with TCP. With encryption enabled, AWS uses TLS over TCP for signaling. Copy the connector’s **Outbound host name** for the Famulor form.
4. In **Phone numbers** on the connector, choose **Assign from pool**, select the number and assign it. [Voice Connector settings](https://docs.aws.amazon.com/chime-sdk/latest/ag/edit-voicecon.html) · [Assign AWS phone numbers](https://docs.aws.amazon.com/chime-sdk/latest/ag/assign-voicecon.html).

## Allow Famulor to place calls through AWS

1. In AWS, enable **Termination**. In **Credentials**, add a username and password. In **Calling plan**, allow the countries you need. If you configure **Allowed hosts list**, add the [Famulor outbound source addresses](https://docs.famulor.io/telephony/sip-trunks.md#outbound-source-addresses) for the **Outbound region** you will use.
2. In Famulor, choose **Phone number (DID)** and enter the AWS number in `+E.164`. Select **Provider source IPs** and enter the SIP-signaling networks AWS publishes for the connector’s region. [AWS Voice Connector network requirements](https://docs.aws.amazon.com/chime-sdk/latest/ag/network-config.html).
3. For **Termination address**, enter the connector's **Outbound host name**. Set **Outbound authentication** to username/password with the AWS termination credentials. Enable **Secure trunking** to match the connector’s encryption settings.
4. Save and assign the number to an assistant.

## Test both directions

Call the assigned number externally. Confirm the call appears in **History** with the right assistant and two-way audio. Place a separate outbound test call. If AWS returns 403, check the termination credentials, any source-IP restrictions and the calling plan. If a call connects with no audio, check the TLS and SRTP settings at both ends.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.