> ## Documentation Index
> Fetch the complete documentation index at: https://docs.famulor.io/llms.txt
> Use this file to discover all available pages before exploring further.

# Connect Genesys Cloud to Famulor

> Set up routing, authenticate calls and test the connection from Genesys Cloud to a Famulor assistant.

Use this guide to route calls from Genesys Cloud to your assistant. Confirm the connection method for your account before changing the number’s routing.

## Prepare the Famulor destination

1. Open **Settings → Phone numbers → Add a number → Add SIP integration**. Select the SIP region and copy the displayed SIP URI.
2. For a static SIP connection, agree the exact called number, transport and inbound authentication with your provider or PBX administrator. Enter that number as the DID in Famulor. Use the provider’s complete SIP-signaling source list, or SIP credentials if the provider supports Digest toward this destination.
3. Enter the provider or PBX termination hostname and its outbound authentication if you will place calls through this connection. Save the integration and assign the number to your assistant.

### What to enter in Famulor

The screenshots use the English app labels.

![Incoming calls in Famulor](https://mintcdn.com/ouraicall/1SYDI0Rp2OzxQz66/images/guide-ui/sip-inbound-2026-11-17.webp?fit=max\&auto=format\&n=1SYDI0Rp2OzxQz66\&q=85\&s=3ccc75bb7a279b3fed67f99237270ff5)

Incoming calls in Famulor

* **Your phone number (DID)** · Enter the exact number delivered by Genesys Cloud, with its country code and leading + for an E.164 DID.
* **Inbound authentication / Allowed source IPs** · Choose **Provider source IPs** and enter the complete SIP signaling list for Genesys Cloud and the selected route.
* If the provider sends Digest authentication to Famulor, select **SIP username/password** and use the same inbound credentials configured on the provider side.

![Example in the English app](https://mintcdn.com/ouraicall/4u43DrIxuKKqCPTo/images/guide-ui/sip-genesys-cloud-out-example.webp?fit=max\&auto=format\&n=4u43DrIxuKKqCPTo\&q=85\&s=1e64125d1191ed68dee2f8669ac6ee51)

Example in the English app

* **Termination address** · Use the provider hostname from the setup above (BYOC Cloud). Enter only the hostname, without a SIP prefix or port.
* **Outbound authentication** · For the IP-based setup, select **No outbound credentials** after configuring the PBX or SBC to allow Famulor’s outbound sources.
* Only configure this direction when your provider has confirmed and provisioned it.

## Configure Genesys Cloud

1. In Genesys Cloud, open **Telephony → Trunks → External Trunks → Create New**. Choose **BYOC Carrier → Generic BYOC Carrier**, set the trunk **In-Service**, and choose TCP or TLS. [Genesys BYOC Cloud trunk setup](https://help.genesys.cloud/189574/).
2. For calls from Genesys to Famulor, enter the Famulor SIP hostname in the outbound routing settings. In **SIP Servers or Proxies**, specify port 5060 for TCP or 5061 for TLS. Add an outbound route for the DID and send the intended Genesys call flow or queue to that route.
3. In Famulor, enter the exact DID and the [Genesys SIP-signaling IP addresses for your organization’s region](https://help.genesys.cloud/152869/) under **Provider source IPs**. Use G.711 codecs and test the route.
4. For a separate call back into Genesys, use the Genesys hostname and routing identifier, and allow [Famulor’s outbound source addresses](https://docs.famulor.io/telephony/sip-trunks.md#outbound-source-addresses) under **SIP Access Control**. If your Genesys endpoint requires a custom termination port or routing method, confirm compatibility before enabling that direction. [Genesys external trunk settings](https://help.genesys.cloud/130654/).

![Famulor SIP integration showing Europe and the inbound SIP address](https://mintcdn.com/ouraicall/1SYDI0Rp2OzxQz66/images/guide-ui/sip-region-2026-11-17.webp?fit=max\&auto=format\&n=1SYDI0Rp2OzxQz66\&q=85\&s=8f35c05be47202a269bf598eb620bc3b)

The SIP integration form provides the region-specific inbound destination.

## Test the complete route

Call your existing number from an external phone. Confirm an inbound entry in **History**, the assigned assistant, the original caller number and two-way audio. Test the schedule, queue overflow or IVR branch that sends calls to the assistant. If you enable outbound calls, place a separate test using the selected outbound number. Test a transfer to the intended human destination before using it in normal routing.

## If the test fails

If no call appears in History, check the number assignment, destination hostname, exact DID and inbound authentication. For a connected call with missing audio, compare the media and codec settings. For an outbound rejection, check the termination credentials, allowed sources, caller ID and destination permissions. Use the call time and call ID when contacting support.

[Shared SIP settings](https://docs.famulor.io/telephony/sip-trunks.md).


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.