Prepare the Famulor destination
- Open Settings → Phone numbers → Add a number → Add SIP integration. Select the SIP region and copy the displayed SIP URI.
- For a static SIP connection, agree the exact called number, transport and inbound authentication with your provider or PBX administrator. Enter that number as the DID in Famulor. Use the provider’s complete SIP-signaling source list, or SIP credentials if the provider supports Digest toward this destination.
- Enter the provider or PBX termination hostname and its outbound authentication if you will place calls through this connection. Save the integration and assign the number to your assistant.
What to enter in Famulor
The screenshots use the English app labels.
Incoming calls in Famulor
- Your phone number (DID) · Enter the exact number delivered by Genesys Cloud, with its country code and leading + for an E.164 DID.
- Inbound authentication / Allowed source IPs · Choose Provider source IPs and enter the complete SIP signaling list for Genesys Cloud and the selected route.
- If the provider sends Digest authentication to Famulor, select SIP username/password and use the same inbound credentials configured on the provider side.

Example in the English app
- Termination address · Use the provider hostname from the setup above (BYOC Cloud). Enter only the hostname, without a SIP prefix or port.
- Outbound authentication · For the IP-based setup, select No outbound credentials after configuring the PBX or SBC to allow Famulor’s outbound sources.
- Only configure this direction when your provider has confirmed and provisioned it.
Configure Genesys Cloud
- In Genesys Cloud, open Telephony → Trunks → External Trunks → Create New. Choose BYOC Carrier → Generic BYOC Carrier, set the trunk In-Service, and choose TCP or TLS. Genesys BYOC Cloud trunk setup.
- For calls from Genesys to Famulor, enter the Famulor SIP hostname in the outbound routing settings. In SIP Servers or Proxies, specify port 5060 for TCP or 5061 for TLS. Add an outbound route for the DID and send the intended Genesys call flow or queue to that route.
- In Famulor, enter the exact DID and the Genesys SIP-signaling IP addresses for your organization’s region under Provider source IPs. Use G.711 codecs and test the route.
- For a separate call back into Genesys, use the Genesys hostname and routing identifier, and allow Famulor’s outbound source addresses under SIP Access Control. If your Genesys endpoint requires a custom termination port or routing method, confirm compatibility before enabling that direction. Genesys external trunk settings.

The SIP integration form provides the region-specific inbound destination.